Home > Product > Shoe Machine > Sole Attaching Machine > Pneumatic Sole Attaching Machine
The TH-586A Pneumatic Sole Attaching Machine is a production press for cemented-construction footwear manufacturing. This pneumatic sole attaching machine handles sport shoes, leisure shoes, and smooth large-sole styles, delivering consistent adhesive pressure across the full sole-to-upper bond interface.
This pneumatic sole attaching machine is engineered around a dual-pressure bonding cycle — two distinct compression phases per operation — that addresses the full contact and bond consolidation requirements that single-pressure presses may not reliably achieve. When procurement managers issue RFQs for a pneumatic sole attaching machine, the key criteria are pressing cycle design, compression time range, operating pressure, and work efficiency per shift.
The TH-586A Pneumatic Sole Attaching Machine specifications for standard footwear production:
| Parameter | Value |
|---|---|
| Voltage | 220V 50Hz |
| Power | 0.2 kW |
| Air Pressure | 0.6 MPa |
| Compression Time | 0–99 seconds (adjustable) |
| Work Efficiency | 1,500 pairs per 8 hours |
| Net Weight | 275 kg |
| Package Weight | 300 kg |
| Machine Dimensions | 520 × 850 × 1,660 mm |
| Packing Size | 650 × 920 × 1,950 mm |
The 0.6 MPa operating pressure of this pneumatic sole attaching machine is calibrated for cemented footwear adhesive bond requirements. Higher air pressure does not automatically mean better bonding — exceeding the optimal threshold on thin synthetic linings or lightweight leisure uppers can cause surface deformation rather than firmer sole adhesion.
This pneumatic sole attaching machine runs two sequential pressure phases per cycle. The first phase compresses and encloses the sole against the upper across the full perimeter. The second phase drives final adhesive consolidation for uniform bond strength. The dual-pressure design of this pneumatic sole attaching machine reduces edge-lift defects — a high-frequency failure mode in cemented footwear that drives warranty returns and rework costs. Factories using this pneumatic sole attaching machine find that the dual-pressure sequence addresses adhesive voids that single-pressure designs can leave at curved sole boundaries.
The TH-586A Pneumatic Sole Attaching Machine supports both automatic and manual modes. In automatic mode, the protective cover closes when the operator's hands leave the work area and the cycle starts immediately. In manual mode, the operator triggers the cycle by pressing work buttons after clearing the area. Both modes on this pneumatic sole attaching machine apply two-hand safety release logic to prevent contact with the press during compression.
The pneumatic sole attaching machine includes a height adjustment function for different sole thickness ranges without tooling changes. For factories producing multiple styles on the same line, this allows operators to dial in the correct platen position for each sole thickness quickly — reducing the non-productive setup time that style changeovers generate. This pneumatic sole attaching machine's height control eliminates manual shim insertion or full-stroke recalibration between runs.
Compression time on the TH-586A Pneumatic Sole Attaching Machine is adjustable from 0 to 99 seconds. Different sole materials — rubber outsoles, EVA midsoles, leather soles — require different dwell times for full adhesive activation. The timer on this pneumatic sole attaching machine standardizes the bonding result across shifts and operators, removing individual judgment variation.
Both modes of this pneumatic sole attaching machine verify work area clearance before the compression cycle activates. The TH-586A's design follows safe operation standards. For factories serving brand customers that conduct BSCI or compliance audits, documented safety design is an evaluated criterion alongside production capacity.
Athletic soles feature complex geometries — heel counters, toe spring curves, and arch profiles. The TH-586A Pneumatic Sole Attaching Machine applies pressing force progressively across the full sole profile, reducing adhesive void risk at curved boundaries. A mid-scale athletic footwear factory integrating this pneumatic sole attaching machine into its cementing line typically sees measurable reductions in delamination failures compared to manual pressing.
At 1,500 pairs per 8-hour shift, this pneumatic sole attaching machine delivers throughput for high-volume flat-sole production. The auto mode cycle — placement, automatic cover closure, timed compression, release — minimizes operator cycle time and removes the variability from manual press activation timing.
OEM factories switching pressing parameters between styles benefit from the TH-586A Pneumatic Sole Attaching Machine's adjustable time and height settings. Sourcing teams at footwear brands verify that a pneumatic sole attaching machine can demonstrate repeatable parameter settings across a full shift — the TH-586A's controls provide this documented configuration capability.
This pneumatic sole attaching machine operates at 220V 50Hz, 0.2 kW — low power draw that reduces electrical infrastructure requirements versus hydraulic sole attaching systems.
The TH-586A Pneumatic Sole Attaching Machine requires a 0.6 MPa compressed air supply, within the standard range of factory-grade air compressor systems. Sourcing teams should verify the existing air distribution system maintains stable delivery pressure during concurrent pneumatic equipment operation on the line.
Sourcing pneumatic cylinder seal kits from non-OEM suppliers can introduce bore tolerance mismatches that cause slow internal pressure leakage and gradual force loss. Confirming OEM seal kit availability with the pneumatic sole attaching machine manufacturer at procurement stage avoids this maintenance complication.
At 275 kg net weight and 520 × 850 × 1,660 mm dimensions, the TH-586A Pneumatic Sole Attaching Machine has a compact footprint suitable for space-constrained factory floors. The 650 × 920 × 1,950 mm packing size is compatible with standard container configurations for international shipping.
Guangdong Tenghong Machinery Technology Co., Ltd. designs this pneumatic sole attaching machine for the complete sole bonding workflow — from height calibration through dual-phase pressing to timed release. Auto and manual modes give production supervisors flexibility to match operating mode to operator skill level and batch size.
For quality control teams, the TH-586A Pneumatic Sole Attaching Machine's dual-pressure cycle addresses adhesive void and edge-lift failure modes that generate high rework rates. For procurement managers issuing RFQs, this pneumatic sole attaching machine's documented specifications — 0.6 MPa, 0–99 second compression timer, 1,500 pairs per shift — provide verifiable performance parameters for pre-purchase evaluation.
The TH-586A Pneumatic Sole Attaching Machine suits sport shoe, leisure shoe, and smooth large-sole production, as well as OEM operations with varied sole specifications across multiple brand accounts.
EN
